IX
Versatile Heavy TankThe SPHT, a tier IX premium U.S.A. heavy tank: its 3D model and photo mode, its armor with hull down and Optimize angling, its characteristics and modules, and the damage its marks of excellence need on EU, NA and ASIA.

| Server | 1st mark65% | 2nd mark85% | 3rd mark95% | 100%the best |
|---|---|---|---|---|
| EU | 2,8087 d −3 | 3,8147 d −12 | 4,5727 d −34 | 5,1707 d −53 |
| NA | 2,5867 d +54 | 3,5857 d +86 | 4,3767 d +103 | 5,0027 d +116 |
| ASIA | 2,6147 d +8 | 3,6147 d −11 | 4,3667 d −16 | 4,9357 d −22 |
| Server | 3rd Classtop 50% | 2nd Classtop 20% | 1st Classtop 5% | Ace Tankertop 1% |
|---|---|---|---|---|
| EU | 7927 d −11 | 1,0847 d −1 | 1,3327 d −4 | 1,5327 d −26 |
| NA | 7577 d −17 | 1,0567 d −5 | 1,3077 d −14 | 1,5037 d −2 |
| ASIA | 8067 d +19 | 1,0567 d +9 | 1,3047 d +33 | 1,4967 d +43 |
This project stood out from U.S. tanks developed in the late 1950s to early 1960s chiefly in terms of appearance, since the vehicle was assembled from rolled armor plates. In that period, American tanks had cast hulls and turrets produced by a limited number of factories. This was sufficient during peacetime, but not enough under mobilization conditions. The military needed to build a tank using rolled plates as a fall-back. The Detroit-based Independent Engineering Company started the development and proposed a design for a vehicle with a turret and hull made from rolled steel. The project was terminated at the stage of firing at dummies.